Εγω εχω ενα της evolution το οποιο δεν χρειαζετε καν drivers. Το δοκιμασες αν λειτουργα χωρις τους drivers????
Αλαξε κανενα γιου ες μπι σλοτ και βλεπεις.
http://www.emu.com/support/files/download2.asp?Centric=767&Legacy=0&Platform=1.
Αυτους τους drivers βρισκω που μαλλον ειναι και οι σωστοι. Μηπως τους βαζεις λαθος???
Installation Instructions:
To Install:
Connect your Xboard and turn it on.
Run the self-extracting installer.
Follow the instructions shown in the Installer.
When the Firmware Updater dialog box appears, select the device you want to update, and click Update. Note: DO NOT unplug the Xboard during the firmware update.
Once calibration finishes, click Exit.
When the Found New Hardware Wizard appears, click Cancel.
Note: A small number of Xboard 25/49 may encounter difficulties such as blank screen or incorrect knob response after installing the firmware. If you encounter this problem, you should re-initialize the Xboard's UART calibration.
To Reset the UART calibration:
Connect your Xboard and turn it on.
Press the Home, Edit, Patch Select, and MIDI Channel buttons at once. The LEDs on the Xboard will flash, and the Display will say "Good" repeatedly. Moving a continuous controller or the data slider clears this message.
If the display says "bAd", you should try this process again until a "Good" message appears. If, after several attempts, it still says "bAd", you may have a hardware problem, and should contact E-MU Technical Support at: